Pretvornik za priklop 16x BNC kamer (video) na snemalnik preko 4x mrež. kablov « Nazaj

16-channel transmitter or receiver allowing to transmit video signals from 16 cameras via four 8-wire UTP cables. When used as the transmitter in pair with an active receiver, it can send the video signals over distances up to 1500 m, preserving their original quality.
The device matches the 75 ohm impedance of the unbalanced source or load to the impedance of the balanced lines formed by the pairs of the UTP cable.
Used in video surveillance systems, the devices allow efficient design of transmission lines without hard wiring.

• interference-free transmission of 16 video signals
• simpler and cheaper wiring - the 16 video channels are transmitted via four UTP CAT5e cables
• range of transmission with passive receivers (e.g. T16662, T16664) up to 330 m
• range of transmission with active receiver (e.g. T16675) up to 1500 m
• passive components - no power supply needed
• built-in anti-interference filters
• possibility of connecting UTP cables via RJ-45 connectors or screw terminals

A UTP cable rated CAT5 or higher is required. The quality of the cable used has a direct impact on the image quality and transmission range.

The wires should be connected (using a crimping tool,) in accordance with the scheme TIA/EIA-586B for RJ-45 connectors. Coaxial cables terminated with BNC plugs are to be connected to the BNC sockets.