Niste prijavljeni. Prijava »
Prva stran
Video Nadzor
Montažni elementi
A / V sprejemnik UTP - 4x BNC do 2km

A / V sprejemnik UTP - 4x BNC do 2km « Nazaj

Naša šifra:

T16745
74,00 €
Trenutno ni na zalogi
Količina

The active UTP video receiver is used to receive four video signals transmitted from complementary active video transmitter (T16744) via 8-wire CAT5e UTP cable over distances up to 2400 m, preserving original video quality.
The device matches the 100 ohm impedance of the balanced transmission lines (UTP cable) the impedance of the unbalanced inputs of a multiplexer, DVR etc. Used in video surveillance systems, the pairs of complementary devices allow efficient design of transmission lines without hard wiring.

Specifikacije

Bolj podrobno:

Montažni elementi, bolj podrobno... Pretvorniki(izkoristi utp )

Opis

 

LED indicators
  • red: POWER
  • green: VIDEO
Distinguishing features
  • interference-free reception of four video signals
  • the four channels use one 8-wire CAT5e UTP cable - it's cheaper and better solution than troublesome long coaxial lines
  • maximum transmission distance 2400 m (using complementary active transmitter  T16744
  • maximum transmission distance 1500 m (using a passive video transmitter)
  • built-in anti-interference filters
The type of cable and connector wiring
A UTP cable rated CAT5 or higher is required. The quality of the cable used has a direct impact on the image quality and transmission range.

The wires should be connected (using a crimping tool,) in accordance with the scheme TIA/EIA-586B for RJ-45 connectors. Coaxial cables terminated with BNC plugs are to be connected to the BNC sockets.

Powered by Shopamine.