Niste prijavljeni. Prijava »
Prva stran
Video Nadzor
Montažni elementi
A / V oddajnik UTP - 4x BNC do 2km

A / V oddajnik UTP - 4x BNC do 2km « Nazaj

Naša šifra:

T16744
74,00 €
Trenutno ni na zalogi
Količina

The active UTP video transmitter is used to transmit four video signals via 8-wire CAT5e UTP cable over distances up to 2400 m (using an active receiver) or over distances up to 1500 m (using a passive receiver), preserving original video quality.
The device matches the 75 ohm impedance of the unbalanced sources to the impedance of the balanced lines formed by the pairs of the UTP cable. Used in video surveillance systems, such devices allow efficient design of transmission lines without hard wiring.

Specifikacije

Bolj podrobno:

Montažni elementi, bolj podrobno... Pretvorniki(izkoristi utp )

Opis

 

LED indicators
  • red: POWER
  • green: VIDEO
Distinguishing features
  • interference-free transmission of four video signals
  • the four channels use one 8-wire CAT5e UTP cable - it's cheaper and better solution than troublesome long coaxial lines
  • maximum transmission distance 2400 m (using complementary active receiver)
  • built-in anti-interference filters
The type of cable and connector wiring
A UTP cable rated CAT5 or higher is required. The quality of the cable used has a direct impact on the image quality and transmission range.

The wires should be connected (using a crimping tool, e.g. ) in accordance with the scheme TIA/EIA-586B for RJ-45 connectors. Coaxial cables terminated with BNC plugs are to be connected to the BNC sockets.

 

Depending on the length of the transmission line, the slider of the "Level" switch should be set to the lowest level (left position) for a distance of 1400-1700 m, to the medium level (middle position) for a distance of 1700-2000 meters, or to the highest level (right position) for a distance of over 2000 meters. The distance ranges are given for CAT5e UTP cable. Using other wiring, the level settings may be appropriate for slightly different distance ranges.

 

Specifications:
   
Code T16744
Bandwidth 0 .. 8 MHz
Impedance of coaxial inputs 75 ohm
Impedance of balanced outputs 100 ohm
Resistance of balanced lines (rated) 18 ohm / 100 m
Differential capacity of balanced lines (max) 62 pf/m
Supported standards NTSC, PAL, SECAM, CCIR
Power 12 VDC / 160 mA
Operating temperature -10 ... +70 °C
Storage temperature -30 ..  +70 °C
Dimensions 204 x 103 x 49 mm (except for BNC sockets)

 

Powered by Shopamine.